VTech ET685 Administrator And Provisioning Manual page 99

Setting
Show Clock
U.S. dialnumber format
Use Flash Plugin
Web User Interface (WebUI) Reference
ET685 Administrator and Provisioning Manual
Description
Specifies whether or not clock and date should be displayed
(at the idle screen usually). Release 8.4.32 or higher: If
<false> phone name is displayed instead (if set).
When this setting is on AND the phone is set to a US time
zone, any numbers you dial will be formatted on the display
like the following examples:
1. National format: 9785550123 will be shown as (978)
555-0123; formatting will start when the 4th digit is
entered.
2. Service numbers (depending on availability in your
area): A service number beginning with 511, for
example, will be shown as (511) -xxxx; formatting will
start when the 4th digit is entered.
3. International access code (for dialing numbers outside
NANP): Numbers beginning with the international
access code 011 will be shown as 011-x-xxxxxx.
Formatting will start when the 4th digit is entered; the
country dialing code (the digit(s) enclosed by the two
hyphens) can consist of one or more digits.
Examples:
After you have entered the four digits 0114, the

display will show them as 011-4.
Entering 9 as a fifth digit will result in 011-49-

because 49 is an existing country dialing code
(Germany).
Entering 2 as a fifth digit will result in 011-42 without

the second hyphen because there is no 42 country
dialing code; entering 0 as the sixth digit will result
in 011-420- because 420 is an existing country
dialing code (Czech Republic).
Note: U.S. dialnumber format is the default setting, but will
only be activated when the selected time zone on the phone
is a US time zone.
If you want to have a live reaction on incoming or outgoing
calls on the phone's "Home" page, switch this option to "on".
Your web browser has to support the Macromedia flash
movie format.
99
Back to Contents