VTech ET685 Administrator And Provisioning Manual page 346

Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Configuration File Parameter Guide
ET685 Administrator and Provisioning Manual
When this feature is set to on, the phone shows the information available
through History-Info header in the incoming INVITE.
on, off
on
show_image_in_call
Define whether or not to show a symbol/photo during a call. Turning this
off will leave more area for displaying the party names and other
information during a call.
one of the following:
on (always show a symbol or photo when displaying a call)
off (never show neither symbol nor photo when displaying a call)
photo_only (no symbol, but photo when there is one)
on
show_ivr_digits
This setting controls whether digits pressed during a connected call are
shown on the display or not. These digits are usually used to control IVR
prompts and to enter user specific information e.g. calling card number, pin
codes, credit card number, billing info etc.
Turning this setting off ensures privacy by disabling the display of these
digits. The actual keys are either not shown at all or replaced replaced by *.
on, off
off
show_local_line
Shows local sip line index during call states in adition to the remote user
display name/number/url
on, off
off
show_name_dialog
346
Back to Contents