VTech ET685 Administrator And Provisioning Manual page 354

Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Configuration File Parameter Guide
ET685 Administrator and Provisioning Manual
positive integer
1800
sip_reconnect_on_rejected_refer
Defines if the phone does automatic reconnect to A party if a REFER
(blind/attended transfer) has been rejected.
Suppose the following call flow:
- A calls B, A and B talking
- B puts A on hold
- B calls C, B and C talking
- B presses transfer key twice to initiate transfer A <-> C
- the call transfer (REFER request) will be rejected, e.g. with SIP Response
Code 603
now the value of this settings decides if:
- B will be automatically connected to A again, while C is on hold
(value "on": old behaviour, not default anymore)
or
- B holds A and C to select the party to talkagain after the transfer failure
(value: off: new and default behaviour introduced with this setting).
on, off
off
sip_request_timeout
Specifies the amount of time before a sip client transaction will be timed
out.
Builtin value is "64", which means the max transaction time is calculated
as '64 * sip_retry_t1' before the transaction is considered to be failed. After
that the routing tries to send the request to the next possible server or the
request will be canceled at all.
1-64
64
354
Back to Contents