VTech ET685 Administrator And Provisioning Manual page 366

Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Configuration File Parameter Guide
ET685 Administrator and Provisioning Manual
on, off
on
suppress_sip_messages
If this setting is on, the information received inside SIP MESSAGE
requests is discarded. If such a request is received, the phone replies with
200 OK but nothing is displayed on the phone screen.
on, off
blank
swupd_curl_timeouts
The normal firmware update process downloads firmware images via the
unix tool curl. This setting allows to modify some curl options which control
the timeout and retry behavior in case of slow downloads and/or errors.
The following curl options get their values from this setting:
--retry
--connect-timeout
--max-time
--retry-max-time
Example: The value "12;30;60;120" would result in the following curl
options:
--retry 12 --connect-timeout 30 --max-time 60 --retry-max-time 120
4 positive integers separated by semicolons
4;600;600;3600
swupd_failed
SYSTEM INTERNAL
This setting gets set to failed if a software update has failed.
blank, failed
blank
366
Back to Contents