VTech ET685 Administrator And Provisioning Manual page 312

Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Configuration File Parameter Guide
ET685 Administrator and Provisioning Manual
blank
monitor_notify_for_subscription_refresh
If we subscribe, we must get a NOTIFY indicating the current state of the
dialog. But sometimes it might happen that the NOTIFY gets lost.
For handling this error state, we introduced a new timer which monitors the
receiving of the NOTIFY. If we don't get the NOTIFY, we un-subscribe the
current subscription and set up a new fresh subscription to get the current
state and resolve the error condition. Normally this setting should remain
off. If you experience that the BLF gets frequently out of sync (staying on
to long), or otherwise have the condition described above, you could give
this setting a try.
on, off
off
ms_before_returning_to_idle_xml
Only needed if an xml-idle-screen is configured to access the springboard.
Allows to show standard-idle screen for the defined number of milliseconds
whenever user presses cancel or touches the screen.
Integer >=0
10000
msw_cp_pat
This is the encrypted persistent authentication token. It must be generated
by the CommPortal server and must only be set through provisioning.
If available, it will be used (instead of directory number and password) by
the first identity to login to Metaswitch CommPortal.
Encrypted token string provisioned by Metaswitch CommPortal server.
blank
msw_directory_number
The Metaswitch Directory number.
Integer, or blank
312
Back to Contents