In This Section
This section provides information to configure slope QoS policies using the command line
interface.
Topics in this section include:
Overview
Default buffer pools exist (logically) at the port, FP or MDA and node levels. Each physical
port has three associated pool objects:
Each MDA on FP1 hardware has four associated pool objects:
Each FP on FP2 or higher based hardware has five associated pool objects:
Quality of Service Guide
•
Overview
•
Basic Configurations
•
Default Slope Policy Values
•
Deleting QoS Policies
•
Access ingress pool
•
Access egress pool
•
Network egress pool
•
Access egress pool
•
Access ingress pool
•
Acc-Ing MC Path Mgmt
•
Network egress pool
•
Access egress pool
•
Access ingress pool
Slope QoS Policies
621