Kubota KX080-4 Workshop Manual page 72

KX080-4, WSM
5. Lower the machine to the ground and mount tools a, b, and c to
the track.
IMPORTANT
• With tool b in place, mount tool c.
(1) Master pin
6. After inserting tools d and e inside tool c, tap the side of tool e
with a hammer.
(1) Master pin
7. Switch tools e and f and tap with a hammer until the master pin
comes out.
8. Once the master pin comes out, remove all of the mounted
tools.
IMPORTANT
• Be careful when working because the moment tool d is
removed, the master link will come off.
(1) Master pin
9. Slowly operate the travel lever backwards on the side being
removed and remove the track.
DANGER
• Do not get your feet under the mini-excavator.
Mounting
1. Jack up the mini-excavator using the front end and blade and
place the track so that the end of the track meshes with the
sprocket under the mini-excavator.
IMPORTANT
• Take care to face the track in the correct direction.
(1) Master link
1-S25
MACHINE BODY
(a) Tool a
(b) Tool b
(c) Tool c
RY9212148MBS0078US0
(d) Tool d
(e) Tool e
RY9212148MBS0079US0
(d) Tool d
(f) Tool f
RY9212148MBS0080US0
RY9212148MBS0081US0
(a) Sprocket side
(b) Front idler side
RY9212148MBS0082US0
KiSC issued 08, 2015 A