Kubota KX080-4 Workshop Manual page 363

KX080-4, WSM
Mode No. 08: Operates the hydraulic quick hitch or for using Tiltrotator
• The multi-purpose signal is ON only while multipurpose switches A and B are pressed simultaneously.
• Enables a spring-locked hydraulic quick hitch
Mode No. 09: Mode No. 01 + Mode No. 08
• Enables the AUX2 hold switch.
• Operates a hydraulic quick hitch or for using Tiltrotator.
Mode No. 10: Operates a hydraulic quick hitch (Assigns AUX2 to the dedicated quick hitch port)
• While pressing multipurpose switch A, operating the AUX2/thumb knob turns the multipurpose switch signal ON.
• Enables the hydraulic quick hitch for single or multi-operation
(J) All Fail Record
• Checks all the fail records since the machine was shipped.
(1) Multi-Purpose Switch A
(2) Multi-Purpose Switch B
(3) AUX2/Thumb Hold Switch
(4) AUX2/Thumb Knob
(1) Multi-Purpose Switch A
(2) Multi-Purpose Switch B
(3) AUX2/Thumb Hold Switch
(4) AUX2/Thumb Knob
1. Select Setting → Others → All Fail Record.
2. If more than one failure record exists, each press of switch 2 or
3 toggles the display.
[Display when fail record exists]
IMPORTANT
• The content displayed when retrieving all fail records is not
deleted even if you delete individual fail records.
(1) Content of failure detected by the
ECU (main or meter or AS) that
detected it
(2) Number of occurrences (1 to 255)
[Display when no fail record exists]
IMPORTANT
• As the failures governed by the engine ECU are not left on
this machine (all fail record), use the engine diagnosis tool.
(1) No fail records
4-S32
ELECTRICAL SYSTEM
(A) Multipurpose signal
RY9212148ELS0058US0
RY9212148ELS0059US0
(A) Multipurpose signal
RY9212148ELS0060US0
(3) Date and hour meter of initial
occurrence and date and hour
meter of last occurrence
RY9212148ELS0061US0
RY9212148ELS0062US0
KiSC issued 08, 2015 A