Kubota KX080-4 Workshop Manual page 214

KX080-4, WSM
13. Remove the floating seal from the gear case side.
• Tool to use: Slotted screwdriver
(1) Floating seal
14. Remove one of the angular bearing.
• Tool to use: pin punch and a hammer
IMPORTANT
• Tap and remove the outer race of the angular bearing.
• Tap evenly on the angular bearing with the pin punch.
(1) Angular bearing
15. Turn the gear case over and remove the other angular bearing.
• Tool to use: pin punch and a hammer
IMPORTANT
• Tap and remove the outer race of the angular bearing.
• Tap evenly on the angular bearing with the pin punch.
(1) Angular bearing
3-S55
HYDRAULIC SYSTEM
RY9212148HYS0025US0
RY9212148HYS0026US0
RY9212148HYS0027US0
KiSC issued 08, 2015 A