Assembly - Kubota KX080-4 Workshop Manual

Hide thumbs Also See for KX080-4:

Table of Contents

KX080-4, WSM

(2) Assembly

• Prepare your workbench in the same way as for disassembly.

• Follow the same general precautions as in the disassembly.

• When assembling the parts, remove all bits of metal or foreign matter from all the parts and make sure

there aren't any burrs or dings on the parts.

• Replace used O-rings with new ones.

• Take care not to damage the O-rings when installing them.

10. Remove the O-ring and seal from the plug.

• Use a mini slotted screwdriver.

• Be careful not to scratch the inside surface of the plug.

Components of the Plug

1. Make sure there aren't any burrs or scratches inside the casing.

2. Install the return spring in the casing.

• Install it in the same position as before disassembly.

(1) Return Spring

HYDRAULIC SYSTEM

RY9212148HYS0159US0

RY9212148HYS0160US0

RY9212001HYS0487US0

RY9212148HYS0161US0

KiSC issued 08, 2015 A

Table of Contents