KX080-4, WSM
[2] RELEASE OF PRESSURE IN THE HYDRAULIC SYSTEM
Purpose
• It is necessary to release the pressure in the hydraulic system when removing/mounting hydraulic devices and
as preparation for taking measurements. Always release the pressure in such cases.
Hydraulic System Pressure Release Procedure
1. Place the machine on firm, level ground, lower the bucket and
blade to ground level, and stop the engine.
2. Without starting the engine, place the engine starter switch in
the "RUN" (B) position.
(1) Starter Switch
3. Place the machine lock lever in the release position.
(1) Machine Lock Lever
3-S134
HYDRAULIC SYSTEM
RY9212148HYS0311US0
RY9212032HYS0060US0
(A) STOP
(B) RUN
(C) START
RY9212001HYS0648US0
(A) Release
(B) Lock
RY9212001HYS0649US0
KiSC issued 08, 2015 A