Kubota KX080-4 Workshop Manual page 254

KX080-4, WSM
6. Install the gasket on the plug.
IMPORTANT
• Be careful that the gasket faces the right direction.
(The gasket has an uneven shape ; put the end with a larger
diameter in first.)
• Apply hydraulic oil on the circumference and lip of the
gasket.
(2) Gasket
7. Install the pushrod into the plug.
IMPORTANT
• Apply hydraulic oil to the pushrod.
• Do not force the gasket in as it may damage its lip.
(1) Pushrod
8. Install the pushrod and plug ASSY in the casing.
(1) Plug
9. Turn the cover on its side and tap lightly on the bushing with a
hammer to install it.
IMPORTANT
• Take care not to knock the bushing so it sticks out from the
inside of the cover.
• Tool to use: hammer
(1) Bushing
3-S95
HYDRAULIC SYSTEM
(1) Plug
RY9212148HYS0190US0
(2) Plug
RY9212148HYS0191US0
(2) Casing
RY9212148HYS0192US0
RY9212148HYS0193US0
KiSC issued 08, 2015 A