Kubota KX080-4 Workshop Manual page 502

KX080-4, WSM
6. Remove the cap and the cover. (LH/RH 2 places each)
(1) Cap
7. With the front glass closed, remove the 4 bolts. (LH/RH 2 places
each)
(1) 4 × Bolt (M6 × 10)
8. Remove the front frame.
IMPORTANT
• Take care not to crack the glass.
• Take care not to lose the roller.
(1) Front Frame
9. Insert the utility knife between the front frame and the glass to
make an opening to pass the piano wire through.
CAUTION
• Take care not to cut your hands or fingers on the blade of
the utility knife.
• Take care not to get hurt from shards of glass.
(1) Utility Knife
10. Pass the piano wire between the front frame and the glass.
11. Wrap both ends of the piano wire around blocks of wood or the
like and move them back and forth.
CAUTION
• The piano wire may break due to the heat from the friction,
so take care not to cut your hand/fingers.
(1) Piano Wire
5-S45
(2) Cover
RY9212148CAS0047US0
RY9212148CAS0048US0
(2) Roller
RY9212148CAS0049US0
RY9212148CAS0050US0
(2) Wood Block
RY9212148CAS0051US0
KiSC issued 08, 2015 A
CABIN