Kubota KX080-4 Workshop Manual page 250

KX080-4, WSM
5. Remove the cam.
IMPORTANT
• Handle the cam and the ball as an assembly.
(Cannot be disassembled)
• Mark the relationship between the cam and the cover.
(1) Cam
6. Remove the hex socket bolt.
• Tool to use: hex socket 5 mm
(1) Hex Socket Bolt
7. Remove the cover.
CAUTION
• Mark the relationship between the cover and the casing.
• Be careful so the pushrod and the plug don't pop out.
(1) Cover
(2) Casing
(3) Pushrod
8. Take the plug out with the pushrod still in place.
IMPORTANT
• Mark the relationship between the plug and the casing.
(1) Plug
(2) Pushrod
3-S91
HYDRAULIC SYSTEM
(2) Ball
RY9212148HYS0174US0
RY9212148HYS0175US0
(4) Plug
(5) O-ring
(6) Return Spring
RY9212148HYS0176US0
(3) O-ring
RY9212148HYS0177US0
KiSC issued 08, 2015 A