Kubota KX080-4 Workshop Manual page 67

KX080-4, WSM
10. Disconnect all the connections and clamps to the engine.
(1) Engine electrical wiring
11. Remove the pump mounting bolts and disconnect from the
pump connector.
12. Suspend the engine and remove the bolts and nuts holding the
engine to its mounts.
13. Disconnect the ground and remove the engine.
CAUTION
• Find its center of gravity and suspend it securely.
• Make sure you have not forgotten to disconnect any
electrical wiring before removing the engine.
First nut
Second nut
Tightening torque
Bolt (M16)
Bolt (M14)
Apply thread lock compound (Loctite 271).
Engine weight
(1) Engine
(2) Pump
(3) Ground wire
(4) First nut
1-S20
MACHINE BODY
RY9212148MBS0067US0
88.2 to 107.8 N·m
9.0 to 11.0 kgf·m
65.1 to 79.5 lbf·ft
166.0 to 191.0 N·m
16.9 to 19.5 kgf·m
122.4 to 140.9 lbf·ft
196.1 to 225.6 N·m
20.0 to 23.0 kgf·m
144.6 to 166.4 lbf·ft
123.6 to 147.1 N·m
12.6 to 15.0 kgf·m
91.2 to 108.5 lbf·ft
Approx. 350 kg (772 lbs)
(5) Second nut
(6) Bolt (M16)
(7) Bolt (M14)
RY9212148MBS0068US0
KiSC issued 08, 2015 A