Kubota KX080-4 Workshop Manual page 198

KX080-4, WSM
23. Install the cover.
IMPORTANT
• Take care so the valve plate does not fall off.
Tightening torque Hex socket bolt
• Tool to use: 12 mm hex socket
(1) Cover
24. Install the plug and relief valve.
IMPORTANT
• Apply hydraulic oil to the relief valve.
Plug
Tightening torque
Relief valve
• Tool to use: 12 mm hex wrench, 27 mm box wrench
(1) Plug
25. Install the O-rings and valve body.
IMPORTANT
• Apply grease to the O-ring.
Tightening torque Hex socket bolt
• Tool to use: 5 mm hex socket
(1) O-ring
26. Install the O-rings and body.
IMPORTANT
• Apply grease to the O-ring.
Tightening torque Hex socket bolt
• Tool to use: 6 mm hex socket
(1) O-ring
3-S39
HYDRAULIC SYSTEM
177.0 ± 10.0 N·m
18.0 ± 1.0 kgf·m
130.5 ± 7.5 lbf·ft
RY9212148HYS0142US0
157.0 ± 10.0 N·m
16.0 ± 1.0 kgf·m
115.5 ± 7.5 lbf·ft
373.0 ± 20.0 N·m
38.05 ± 2.05 kgf·m
275.0 ± 15.0 lbf·ft
(2) Relief valve
RY9212148HYS0143US0
9.8 ± 1.0 N·m
1.0 ± 0.1 kgf·m
7.2 ± 0.7 lbf·ft
(2) Valve body
RY9212148HYS0144US0
32.4 ± 2.0 N·m
3.3 ± 0.2 kgf·m
23.9 ± 1.5 lbf·ft
(2) Body
RY9212148HYS0145US0
KiSC issued 08, 2015 A