Kubota KX080-4 Workshop Manual page 346

KX080-4, WSM
Mode
(2) Setting [H] Others
Item
(A) AI Motor Drive
(B) Exchange (AUX1) (2/Thumb)
(C) Periodic Check Selection
(D) Periodic Check Display
(E) Annual Guidance
(F) Periodic Check Set
(G) Clock Set Warning (Y/N)
(H) Arm Control Adj
(I) Multipurpose Mode
(J) All Fail Record
(K) Opening Select
4-S15
Description
Moves the AI motor position when the
accelerator dial is replaced.
Operates AUX2 via the AUX1 knob. Or
operates AUX1 via the AUX2 knob.
Changes the method of canceling the
periodic check guidance to automatic or
to manual.
Turns off the display of periodic check
guidance. Or turns it on.
Turns on the display of annual check
guidance. Or turns it off.
When the meter is replaced, sets the
periodic check time prior to
replacement to prevent a discrepancy
in the periodic check time.
Turns the message, "Set clock" to be
displayed/not when the clock has the
wrong time.
Set when making fine adjustments to
the stop position of the arm crowd limit.
Changes the operating conditions of the
multi-purpose switch.
Checks all the fail records since the
machine was shipped.
Changes the opening display screen.
ELECTRICAL SYSTEM
Notes
Japan spec. only
RY9212148ELS0028US0
KiSC issued 08, 2015 A