Kubota KX080-4 Workshop Manual page 173

KX080-4, WSM
11. Adjust the horsepower control valve to the measurement M
taken before disassembly.
• Tool to use: ruler, 24, 41 mm wrench, 8 mm hex socket
IMPORTANT
• Pay attention to the initial position.
Nut (1)
Tightening torque
Plug (3)
(1) Nut
(2) Horsepower Control Valve
12. Install the collar and ball.
• Tool to use: Magnet
(1) Collar
13. Install the plug.
• Tool to use: 6 mm hex socket
Tightening torque Plug (1)
(1) Plug
14. Assemble the L/S regulator.
IMPORTANT
• Make sure the spool is facing the right way.
• Pay attention to the sizes of the orifices and insert them in
the right locations.
Tightening torque Orifice (1), (2)
(1) Orifice
3-S14
HYDRAULIC SYSTEM
68.6 N·m
6.70 kgf·m
50.6 lbf·ft
57.0 N·m
5.81 kgf·m
42.0 lbf·ft
(3) Plug
RY9212148HYS0418US0
(2) Ball
RY9212148HYS0419US0
29.4 N·m
3.0 kgf·m
21.7 lbf·ft
RY9212148HYS0420US0
2.45 N·m
0.250 kgf·m
1.81 lbf·ft
(2) Orifice
RY9212148HYS0421US0
KiSC issued 08, 2015 A