Kubota KX080-4 Workshop Manual page 356

KX080-4, WSM
[G] Model Set
• Set when the ECU and/or meters are replaced.
• Select Diagnosis → Model Set to make this setting.
• After setting the model, it is necessary to make the AI, AUX1 knob and AUX2 knob settings.
Screen No.
(1) Model name
(2) Destination
(3) AI
(4) Overload Warning
(5) AUX1
(6) AUX2 / Thumb
(7) Arm Control
(8) Angle
(9) Tilt
(10) Multipurpose Operating
(11) Arm Type
(12) Compartment
(13) Force Mode
(14) Common Rail System
(15) Setup Completed
Content displayed
4-S25
Notes
Eur. spec.: YES
N. Am. spec.: NO
Japan spec.: YES (Arm limit spec. only)
N. Am. spec.: YES (Angle spec. only)
N. Am. spec.: YES (Tilt spec. only)
Has multi-purpose switch connector spec.: YES
2-piece boom spec.: 2
Other specs.: 1
W/ eco mode spec.:1 (KX080-4)
W/AC mode spec.:2
No AC spec.: 0
ELECTRICAL SYSTEM
RY9212158ELS0023US0
KiSC issued 08, 2015 A