Kubota KX080-4 Workshop Manual page 192

KX080-4, WSM
17. Remove the housing from the assembly platform and then
remove the collar.
CAUTION
• If the plate comes off, the shaft may fall, so take care in
handling it.
• Always have the bottom of the shaft touching the ground
when removing the collar and plate.
(1) Collar
18. Remove the plate and then the shaft.
• Tool to use: punch and hammer
(1) Plate
19. Remove the tapered roller bearing and the plug.
• Tool to use: 5 mm hex socket
(1) Tapered roller bearing
20. Remove the oil seal.
• Tool to use: slotted screwdriver and hammer
(1) Oil seal
3-S33
HYDRAULIC SYSTEM
(2) Plate
RY9212148HYS0113US0
(2) Shaft
RY9212148HYS0114US0
(2) Plug
RY9212148HYS0115US0
RY9212148HYS0116US0
KiSC issued 08, 2015 A