KX080-4, WSM
Pump Connector and Housing Assembly Diagram
(1) Connector
(2) Connector mounting bolt
• (a) Apply grease to the spline.
IMPORTANT
• Align the spring pin before tightening the connector mounting bolts.
• Do not use a thread lock on the connector mounting bolts.
• Do not apply grease to the connector rubber seal.
• Align the parallel pin before tightening the pump housing mounting bolts.
Connector mounting bolt
Tightening torque
Housing mounting bolt
(3) Pump housing
(4) Housing mounting bolt
210.0 to 230.0 N·m
21.4 to 23.5 kgf·m
154.9 to 169.6 lbf·ft
48.1 to 55.9 N·m
4.9 to 5.7 kgf·m
35.5 to 41.2 lbf·ft
(5) Parallel pin
3-S3
HYDRAULIC SYSTEM
(6) Spring pin
RY9212148HYS0371US0
KiSC issued 08, 2015 A