Disassembly - Kubota KX080-4 Workshop Manual

Hide thumbs Also See for KX080-4:

Table of Contents

KX080-4, WSM

(1) Disassembly

• All of the parts are precision parts, so be very careful in handling them and take care not to drop or hit

parts against each other.

• If you hit a part too hard while working on it, it may result in burrs or other damage, thus preventing

installation as well as oil leaks and/or compromised performance, so be careful when handling parts.

• If parts are left disassembled or left partway disassembled, humidity or foreign matter may cause rust, so

if interrupting the work is unavoidable, take precautions to protect the parts from rust and dust.

1. Clamp the pilot valve in a vise.

• When clamping it in a vise, use a sheet of copper to prevent

scratching the pilot valve.

(2) Round Plate Nut

2. Use wrenches to remove the adjusting nut and round plate nut.

• Tools to use: 22 mm and 32 mm wrenches

(1) Adjusting Nut

3. Mark the relationship of holes to the casing.

HYDRAULIC SYSTEM

RY9212148HYS0150US0

(3) Adjusting Nut

RY9212148HYS0151US0

RY9212148HYS0152US0

RY9212001HYS0479US0

KiSC issued 08, 2015 A

Table of Contents