Assembly - Kubota KX080-4 Workshop Manual

KX080-4, WSM

(2) Assembly

13. Remove the plug from the pushrod.
(1) Plug
14. Remove the gasket from the plug.
CAUTION
• Use a mini slotted screwdriver to remove it.
• Be careful not to scratch the inside surface of the plug.
• Tool to use: Slotted screwdriver
(1) Plug
15. Remove the O-ring from the plug.
(1) Plug
1. Install the metal washer, shim, secondary pressure spring and
spring seat in order on the spool.
IMPORTANT
• The thickness of the metal washers is different for each
spool ASSY due to the preset adjustment of the secondary
pressure spring.
(1) Spool
(2) Shim
2. Pass the end of the spool through the larger part of the hole in
the spring seat (10), compressing the spring and shifting the
spring seat to the side to install it.
IMPORTANT
• Be careful not to scratch the spool.
• Do not depress the spring seat 4 mm (0.16 in.) ≤
(1) Spring seat
3-S93
HYDRAULIC SYSTEM
(2) Pushrod
RY9212148HYS0182US0
(2) Gasket
RY9212148HYS0183US0
(2) O-Ring
RY9212148HYS0184US0
(3) Secondary Pressure Spring
(4) Spring Seat
RY9212148HYS0185US0
RY9212148HYS0186US0
KiSC issued 08, 2015 A