Kubota KX080-4 Workshop Manual page 225

KX080-4, WSM
12. Install the holder, needle bearing, planetary gear B and drive
gear in order.
(1) Holder
(2) Needle bearing
13. Install the plate.
IMPORTANT
• Clean screw holes prior to installation.
• Apply a thread lock (ThreeBond 2403).
Tightening torque Bolt
• Tool to use: Torx T40
(1) Plate
14. Install the cover.
IMPORTANT
• Apply grease to the O-ring.
(1) Cover
15. Install the wire and plug.
Tightening torque Plug
• Tool to use: 8 mm hex socket
IMPORTANT
• Be sure to fill with the specified amount of gear oil [1.35 L,
(0.36 US gal.)] prior to mounting on the machine.
• After mounting the travel motor on the machine,
double-check the gear oil level.
(1) Wire
3-S66
HYDRAULIC SYSTEM
(3) Planetary gear B
(4) Drive gear
RY9212158HYS0065US0
35.3 ± 2.0 N·m
3.6 ± 0.2 kgf·m
26.0 ± 1.5 lbf·ft
(2) Bolt
RY9212158HYS0066US0
(2) O-ring
RY9212158HYS0029US0
58.8 ± 9.8 N·m
6.0 ± 1.0 kgf·m
43.4 ± 7.2 lbf·ft
(2) Plug
RY9212158HYS0030US0
KiSC issued 08, 2015 A