Kubota KX080-4 Workshop Manual page 222

KX080-4, WSM
[B] Gear Case
1. Set one of the angular bearings in the gear case and use a
press to mount it.
Turn the gear case over and install the other angular bearing
with the press.
2. Grease the O-ring of the floating seal and set the floating seal
on the flange holder with the floating seal installation tool.
• Tool to use: floating seal installation tool
(f) Floating seal installation tool
3. Apply a little gear oil on the sliding surface of the floating seal.
[4 places, every 1.6 rad (90°)]
(1) Floating seal
4. Grease the O-ring of the floating seal and use the floating seal
installation tool to set the floating seal on the gear case.
• Tool to use: floating seal installation tool
(f) Floating seal installation tool
3-S63
HYDRAULIC SYSTEM
RY9212158HYS0027US0
RY9212158HYS0059US0
(2) Flange holder
RY9212148HYS0031US0
RY9212158HYS0060US0
KiSC issued 08, 2015 A