Kubota KX080-4 Workshop Manual page 175

KX080-4, WSM
20. Install the O-rings.
21. Mount the port block on the case.
• Tool to use: 10, 16 mm hex socket
CAUTION
• Don't pinch your fingers between the port block and the
case.
Socket head bolt (1)
Tightening torque
Socket head bolt (2)
(1) Hex Socket Bolt M16 x 40 x 5
(2) Hex Socket Bolt M10 x 40 x 2
22. Install the gear pump.
• Tool to use: 10 mm hex socket
CAUTION
• Don't pinch your fingers between the port block and the
gear pump.
Tightening torque Socket head bolt (1)
(1) Hex Socket Bolt (w/washer)
M10 x 20 x 2
3-S16
HYDRAULIC SYSTEM
196.0 N·m
19.99 kgf·m
144.6 lbf·ft
106.9 N·m
10.90 kgf·m
78.85 lbf·ft
(3) O-Ring
(4) O-Ring
RY9212148HYS0427US0
44.1 N·m
4.50 kgf·m
32.5 lbf·ft
RY9212148HYS0428US0
KiSC issued 08, 2015 A