Kubota KX080-4 Workshop Manual page 507

KX080-4, WSM
10. Install the wiper motor.
Tightening torque Bolt (2)
(1) Wiper Motor
11. Install the wiper motor harness, cover and cap.
(1) Harness
(2) Cover
12. Install the nut.
IMPORTANT
• Take care not to crack the glass.
Tightening torque Nut (1)
(1) Nut
13. Install the cap, wiper and nuts.
Tightening torque Nut (3)
(1) Cap
(2) Wiper
5-S50
3.5 to 6.5 N·m
0.36 to 0.66 kgf·m
2.58 to 4.79 lbf·ft
(2) 3 × Bolt (M6 × 25)
RY9212148CAS0069US0
(3) Cap
RY9212148CAS0070US0
2.5 to 3.5 N·m
0.26 to 0.36 kgf·m
1.84 to 2.58 lbf·ft
RY9212148CAS0071US0
6.5 to 9.5 N·m
0.66 to 0.97 kgf·m
4.79 to 7.01 lbf·ft
(3) Nut
RY9212148CAS0072US0
KiSC issued 08, 2015 A
CABIN