Kubota KX080-4 Workshop Manual page 207

KX080-4, WSM
5. After inserting the collar, install the circlip.
IMPORTANT
• Install the circlip with the rounded side down.
• Tool to use: snap ring pliers
(1) Circlip
6. Install the O-ring on the bottom cover.
IMPORTANT
• Apply grease to the O-ring.
(1) O-ring
7. Mount the bottom cover.
Tightening torque Hex socket bolt
• Tool to use: 10 mm hex socket
IMPORTANT
• Apply thread lock (ThreeBond 1324 or equivalent) to the
hex bolts.
(1) Bottom cover
3-S48
HYDRAULIC SYSTEM
RY9212148HYS0014US0
RY9212148HYS0015US0
84.0 ± 6.0 N·m
8.6 ± 0.6 kgf·m
62.0 ± 5.0 lbf·ft
RY9212148HYS0016US0
KiSC issued 08, 2015 A