Kubota KX080-4 Workshop Manual page 372

KX080-4, WSM
Inhibit switch OFF
Clog Warning
Buzzer
Level lamp
Level 0 OFF
··PiPiPi··
Blinking
Level 1 (Every
(Yellow)
60 sec.)
··PiPiPi··
Blinking
Level 2 (Every
(Yellow)
60 sec.)
PiPiPi
Blinking
(Every
(Yellow)
60 sec.)
Level 3
··PiPiPi··
(0-50 sec.)
Pi-···Pi-
(50-60 sec.)
Blinking
(Red)
Pi-···Pi-
(from 60 sec.)
PiPiPiPi
(0-50 sec.)
Blinking
Level 4
(Red)
Pi-···Pi-
(from 50 sec.)
Engine
Engine RPM
output
– – –
– –
More than
1900 rpm
–
Less than
1900 rpm
More than
50 %
1900 rpm
50 %
Less than
1900 rpm
–
50 % –
Contents
Screen
displayed
–
Exhaust
temperature
rising
Operate carefully
Can continue
working
Exhaust
temperature
rising
Operate carefully
Can continue
working
Exhaust
temperature
rising
Operate carefully
Can continue
working
Increase engine
RPM
Exhaust
temperature
rising
Operate carefully
Can continue
working
HP limited to low
power
Exhaust
temperature
rising
Operate carefully
Can continue
working
Increase engine
RPM
HP limited low
power
Engine forced to
stop
Increase RPM
and restart
DPF clogged up
Needs
maintenance
4-S41
ELECTRICAL SYSTEM
Status and correction
– –
More than 1900 engine RPM
needed: DPF regenerates
Less than 1900 engine RPM:
DPF may not
auto-regenerate due to open
air and water temp.
Being auto-regenerated
• When the engine RPM is
low, DPF may not
auto-regenerate due to
open air and water temp.
• The screen changes
every 3 sec.
• Being auto-regenerated
• The screen is changed
every 3 sec.
• When the engine RPM is
low, DPF may not
auto-regenerate due to
open air and water temp.
• The screen changes
every 3 sec.
*2
Turn and maximize the
accelerator dial and restart.
*1
Use the engine diagnosis
tool and regenerate it
manually
*1
*2
KiSC issued 08, 2015 A