Kubota KX080-4 Workshop Manual page 216

KX080-4, WSM
6. Remove the hex socket bolts and then the base plate.
• Tool to use: 10 mm hex socket
(1) Hex socket bolt
7. Remove the springs and valve plate from the base plate.
(1) Spring
8. While pressing down on the brake piston with a rag, blow air
through the brake release oil passage hole and remove the
brake piston.
CAUTION
• Be careful because if you blast air into the passage, the
brake piston may come flying off.
(1) Brake Piston
9. Remove the plates and discs.
(1) Plate
3-S57
HYDRAULIC SYSTEM
(2) Base plate
RY9212158HYS0010US0
(2) Valve plate
RY9212158HYS0011US0
(A) Brake Release Oil Passage Hole
(B) 2-Speed Switch Oil Passage Hole
RY9212158HYS0012US0
(2) Disc
RY9212158HYS0051US0
KiSC issued 08, 2015 A