Removing Other Panes Of Glass; Installing The Glass On The Right - Kubota KX080-4 Workshop Manual

KX080-4, WSM

[5] REMOVING OTHER PANES OF GLASS

[6] INSTALLING THE GLASS ON THE RIGHT

1. Protect inside cabin from possible glass debris.
2. Insert the utility knife between the cabin frame and the glass to
make an opening to pass the piano wire through.
CAUTION
• Take care not to cut your hands or fingers on the blade of
the utility knife.
• Take care not to get hurt from shards of glass.
(1) Cover
3. Pass the piano wire between the cabin frame and the glass.
4. Wind the ends of piano wire on with wood-block or something
like handle, and cut the seal between the frame and glass with
moving the piano wire alternately.
CAUTION
• The piano wire may break due to the heat from the friction,
so take care not to cut your hand/fingers.
(1) Piano Wire
1. Remove any adhesive remaining on the cabin frame.
CAUTION
• Take care not to cut your hands or fingers on the blade of
the scraper.
2. Use the cleaning agent to remove any grime or oil remaining on
the cabin frame.
3. Apply primer and allow to dry for the indicated time.
• Cleaning agent (Sika Aktivator-205)
• Primer (Sika Primer-206 G + P)
CAUTION
• Take care not to get the cleaner or the primer in your eyes.
15°C or higher
Ambient
temperature
Below 15°C
(1) Cabin frame
(2) Primer
5-S46
(2) Utility Knife
RY9212148CAS0052US0
(2) Wood Block
RY9212148CAS0053US0
RY9212148CAS0054US0
10 minutes
30 minutes
(a) No less than 20 mm (0.79 in.)
RY9212148CAS0055US0
KiSC issued 08, 2015 A
CABIN