Table of Contents
Advertisement
KX080-4, WSM
[H] Others
(A) AI Motor Drive
• Moves the AI motor position when the accelerator dial is replaced.
(B) Exchange (AUX1) (2/Thumb)
• Operates AUX2 via the AUX1 knob. Or operates AUX1 via the AUX2 knob.
(C) Periodic Check Selection
• Changes the method of canceling the periodic check guidance to automatic or to manual.
(D) Periodic Check Display
• Turns off the display of periodic check guidance. Or turns it on.
1. Select Setting → Others → AI Motor Drive.
2. Press switch 2 or 3 to move the lever position.
• Switch 2: Counterclockwise
• Switch 3: Clockwise
IMPORTANT
• The common rail spec. does not have an AI motor, so this
does not function.
1. Select Setting → Others → Exchange (AUX1) (2/Thumb).
2. Select the desired operating method.
3. Press SW5 to make the setting.
Normal
Reverse
1. Select Setting → Others → Periodic Check Selection.
2. Select the desired operating method.
3. Press SW5 to make the setting.
Selection mode
Method for canceling periodic check guidance
Turn the key ON/OFF 10 times or operate the meter
Auto (N.A. spec.)
Manual (Eur. spec.)
Operate meter panel after making periodic check.
1. Select Setting → Others → Periodic Check Display.
2. Select the desired operating method.
3. Press SW5 to make the setting.
• When shipped: displays
4-S26
ELECTRICAL SYSTEM
RY9212148ELS0003US0
AUX1
Right control lever
Left control lever
Left control lever
Right control lever
RY9212148ELS0004US0
panel after making periodic checks.
RY9212148ELS0005US0
RY9212148ELS0006US0
AUX2
KiSC issued 08, 2015 A
Advertisement
Chapters
Table of Contents
Troubleshooting
