Kubota KX080-4 Workshop Manual page 241

KX080-4, WSM
4. Put a rod against the camshaft and tap it out gently with a
hammer.
• Tools to use: rod (8mm ( 0.31 in.) or less) and hammer
(1) Camshaft
5. Remove the cam with the set screw and lock nut in place.
IMPORTANT
• Be careful as a pushrod may pop out.
(1) Cam
(2) Set screw
6. Remove the hex bolts.
• Tool to use: 7 mm hex socket
(1) Hex socket bolt
7. Remove the cover.
IMPORTANT
• Be careful as the pushrod and/or the plug may pop out due
to the force of the spring.
(1) Cover
8. Take the pushrod off the plug.
IMPORTANT
• Be careful not to scratch the pushrod.
• Be careful as the plug may pop out due to the force of the
spring.
(1) Plug
3-S82
HYDRAULIC SYSTEM
RY9212148HYS0233US0
(3) Lock nut
RY9212148HYS0234US0
(2) Cover
RY9212148HYS0235US0
RY9212148HYS0236US0
(2) Pushrod
RY9212148HYS0237US0
KiSC issued 08, 2015 A