Kubota KX080-4 Workshop Manual page 194

KX080-4, WSM
6. Put the housing on the assembly platform and install the plug.
7. Install the holder and the washer.
Tightening torque Plug
• Tool to use: 5 mm hex socket
IMPORTANT
• Install with the rounded side of the washer down.
(1) Plug
(2) Holder
8. Install the inner race, needle bearing and planetary gear B in
order.
IMPORTANT
• Take care to install the gear facing the right direction.
(1) Inner race
(2) Needle bearing
9. Install the plate and then the sun gear.
IMPORTANT
• Apply a thread lock (Loctite 242) to the hex flange bolts.
Tightening torque Hex flange bolt
• Tool to use: 5 mm hex socket
(1) Plate
(2) Hex flange bolt
10. Install the holder and the washer.
IMPORTANT
• Install with the rounded side of the washer down.
(1) Holder
11. Install the inner race, needle bearing, planetary gear A and drive
gear in order.
(1) Inner race
(2) Needle bearing
3-S35
HYDRAULIC SYSTEM
15.7 ± 0.8 N·m
1.6 ± 0.1 kgf·m
11.6 ± 0.6 lbf·ft
(3) Washer
RY9212148HYS0123US0
(3) Planetary gear B
RY9212148HYS0124US0
24.5 ± 4.9 N·m
2.5 ± 0.5 kgf·m
18.1 ± 3.6 lbf·ft
(3) Sun gear
RY9212148HYS0125US0
(2) Washer
RY9212148HYS0126US0
(3) Planetary gear A
(4) Drive gear
RY9212148HYS0127US0
KiSC issued 08, 2015 A