Kubota KX080-4 Workshop Manual page 205

KX080-4, WSM
6. Use a press to remove the shaft.
IMPORTANT
• Spread a protective mat to prevent the shaft from hitting if
it falls.
• Be careful so the shaft does not fall all of a sudden.
(1) Swivel joint
7. Remove the U packing and the collar in order.
• Tool to use: Slotted screwdriver
(1) Packing (U)
8. Remove the O-ring and seal inside the body.
• Tool to use: awl
 Work Tip
• Depending on the position where the seal is inserted, turn the
body counterclockwise to remove it.
(1) O-ring
3-S46
HYDRAULIC SYSTEM
(2) Protective mat
RY9212148HYS0007US0
(2) Collar
RY9212148HYS0008US0
(2) Seal
RY9212148HYS0009US0
KiSC issued 08, 2015 A