Kubota KX080-4 Workshop Manual page 242

KX080-4, WSM
9. Remove the plug with its grease cap and gasket intact.
10. Take out the seat and damping spring.
IMPORTANT
• Be careful as the piston may pop out due to the force of the
spring.
(1) Plug
(2) Seat
11. Remove the spring seat from the casing.
(1) Spring seat
12. Remove the hex socket bolts and then the cover.
• Tool to use: 7 mm hex socket
(1) Hex socket bolt
13. Remove the hex bolts.
• Tool to use: 7 mm hex socket
IMPORTANT
• Loosen the 2 hex socket bolts evenly to keep the damper
casing level.
14. Remove the damper casing, reducing valve ASSY and the
return spring.
IMPORTANT
• Be careful as the reducing valve ASSY may pop out due to
the force of the spring.
(1) Damper casing
(2) Return spring
3-S83
HYDRAULIC SYSTEM
(3) Damping spring, large
(4) Damping spring, small
RY9212148HYS0238US0
RY9212148HYS0239US0
(2) Cover
RY9212148HYS0240US0
RY9212148HYS0241US0
(A) Reducing valve ASSY
RY9212148HYS0242US0
KiSC issued 08, 2015 A