Kubota KX080-4 Workshop Manual page 170

KX080-4, WSM
18. Remove the shaft.
• Tool to use: plastic hammer
CAUTION
• Be careful not to hit your fingers with the hammer.
(1) Shaft
19. Remove the shaft from the bearing case.
• Tool to use: plastic hammer
CAUTION
• Be careful not to hit your fingers with the hammer.
(1) Shaft
20. Remove the snap ring.
• Tool to use: Snap ring pliers
CAUTION
• Take care not to cut yourself, such as in the face, with the
snap ring.
(1) Snap Ring
21. Remove the bearing.
• Tool to use: punch and plastic hammer
CAUTION
• Be careful not to hit your fingers with the hammer.
(1) Snap Ring
(2) Bearing
3-S11
HYDRAULIC SYSTEM
RY9212148HYS0405US0
(2) Bearing Case
RY9212148HYS0406US0
RY9212148HYS0407US0
(3) Thrust Washer
RY9212148HYS0408US0
KiSC issued 08, 2015 A