KX080-4, WSM
(1) Disassembly Procedures
[A] Gear Case
1. Mount the travel motor to the assembly platform and remove the
plug.
• Tool to use: 8 mm hex socket
(1) Plug
2. Remove the wire.
• Tool to use: Slotted screwdriver
(1) Wire
3. Attach the cover removal tool and knock it up to remove the
cover.
• Tool to use: Cover removal tool
If a cover removal tool is not available:
• Mount an eye bolt on the cover and put a bar through the hole
in the eye bolt.
• Knock upwards on both sides of the bar and remove the cover.
(1) Cover
4. Remove the plate.
• Tool to use: Torx T40
(1) Plate
3-S52
HYDRAULIC SYSTEM
RY9212158HYS0002US0
RY9212158HYS0003US0
(a) Cover removal tool
RY9212148HYS0022US0
RY9212158HYS0045US0
KiSC issued 08, 2015 A