Table of Contents
Advertisement
KX080-4, WSM
3. Install the washer, secondary pressure spring and spring seat
on the spool in order.
IMPORTANT
• Do not depress the spring seat more than 6 mm (0.24 in.).
• Be careful not to scratch the spool.
(1) Spool
(2) Washer
4. Install the reducing valve ASSY.
After installing it, make sure the spool moves smoothly.
IMPORTANT
• Install it in the same position as before disassembly.
5. Install the O-ring on the plug.
(1) Plug
6. Install the seal on the plug.
IMPORTANT
• Be careful that the seal faces the right direction.
• Apply hydraulic oil on the circumference and lip of the seal.
(1) Plug
(2) Seal
3-S76
HYDRAULIC SYSTEM
(3) Secondary Pressure Spring
(4) Spring Seat
RY9212148HYS0162US0
RY9212001HYS0490US0
(2) O-Ring
RY9212148HYS0163US0
(3) Pushrod
(4) O-Ring
RY9212148HYS0164US0
KiSC issued 08, 2015 A
Advertisement
Chapters
Table of Contents
Troubleshooting
