Kubota KX080-4 Workshop Manual page 33

KX080-4, WSM
• Insert grommet securely.
(1) Grommet
• Clamp wiring securely but do not damage wires with the clamp.
(1) Clamp (Spiral Clamp Around Wire)
(2) Wire
• Clamp wiring so it is not twisted, pulled too tight or sag too
much. However, moving parts may require play in the wiring.
(1) Wire
(2) Clamp
• Do not pinch or bind wiring when installing parts.
(1) Wire
• After wiring, double-check terminal protectors and clamps
before connecting battery cables.
(1) Cover (Install Covers Securely)
G-12
GENERAL
(A) Correct
(B) Incorrect
RY9212001GEG0027US0
(3) Clamp
(4) Welding Mark
RY9212001GEG0028US0
(A) Correct
(B) Incorrect
RY9212001GEG0029US0
(A) Incorrect
RY9212001GEG0030US0
RY9212001GEG0031US0
KiSC issued 08, 2015 A