Kubota KX080-4 Workshop Manual page 314

KX080-4, WSM
Swing cylinder
1. Arm cylinder fully compressed, bucket cylinder fully extended,
and bucket bottom approximately 1.0 m (40 in.) above ground
level.
2. Operate the swing pedal full stroke and measure how long it
takes to swing full stroke to the right and to the left.
(a) 1.0 m (40 in.)
Blade cylinder
1. Jack up the machine with the front to ensure the blade can move
through its entire stroke top to bottom.
2. Operate the blade control lever full stroke and measure the time
it takes the blade to go full stroke up and down.
Angle Cylinder (Excavators with Angle Specification)
1. Jack up the machine with the front.
2. Operate the angle control switch full stroke and measure the
time it takes the arm to go full stroke angle right and angle left.
3-S155
HYDRAULIC SYSTEM
RY9212148MBS0120US0
RY9212148MBS0121US0
RY9212158MBS0005US0
KiSC issued 08, 2015 A