Kubota KX080-4 Workshop Manual page 504

KX080-4, WSM
4. Expand the sash in direction A and install the 1st pane of glass
in direction B, then the seal and then the 2nd pane of glass.
(1) Seal
5. Put the end of the seal back in place with a slotted screwdriver.
(2 places)
6. Apply the coating.
IMPORTANT
• Apply the coating so there are no gaps and water cannot
leak.
(1) Seal
7. Stick the new spacers at the set locations.
(1) Spacer
8. Apply the adhesive around the entire cabin frame.
(1) Adhesive (Sikaflex - 265)
(2) Nozzle
5-S47
RY9212148CAS0056US0
(a) Coating (Sikaflex - 265)
RY9212148CAS0057US0
(a) 100 mm (3.9 in.)
RY9212148CAS0058US0
(a) No less than 10 mm (0.39 in.)
(b) No less than 12 mm (0.47 in.)
RY9212148CAS0059US0
KiSC issued 08, 2015 A
CABIN