If
correct
adjustment
▼
be made using the clutch lever
adjuster,
use
adjuster at the lower end of the
cable.
1
1.
Adjuster lock nuts
2.
Outer clutch cable
To adjust the clutch cable:
Loosen the adjuster lock nuts.
▼
Turn the outer cable adjuster to give
▼
0.08 - 0.12 in (2 - 3 mm) of free play
at the clutch lever.
Tighten the adjuster lock nuts to
▼
27 lbf in (3 Nm).
cannot
the
clutch
cable
2
MAINTENANCE
Drive Chain
Warning
A loose or worn chain, or a chain that
breaks or jumps off the sprockets
could catch on the engine sprocket or
lock the rear wheel.
A chain that snags on the engine
sprocket will injure the rider and lead
to loss of motorcycle control and an
accident.
Similarly, locking the rear wheel will
lead to loss of motorcycle control and
an accident.
For safety and to prevent excessive
wear the drive chain must be checked,
adjusted and lubricated in accordance
with
the
scheduled
requirements. Checking, adjustment and
lubrication must be carried out more
frequently for extreme conditions such
as high speed riding, salty or heavily
gritted roads.
If the chain is badly worn or incorrectly
adjusted (either too loose or too tight)
the chain could jump off the sprockets
or break. Therefore, always replace
worn or damaged chains using genuine
Triumph parts supplied by an authorized
Triumph dealer.
121
maintenance