MAINTENANCE
156
Front Brake Wear Inspection
If installing new proprietary brand
brake pads, check that the brake
backing plate of the brake pad is the
specified thickness shown in the table.
Installing brake pads with the brake
backing plate less than the specified
thickness may result in brake failure
due to the possible loss of the brake
pad as it wears.
Brake
pads
in
accordance
requirements and replaced if worn to, or
beyond the minimum service thickness.
Street Triple R
clci
1.
Carrier plate
2.
Brake pad
Warning
must
be
inspected
with
scheduled
2
1
Street Triple RS and
Street Triple Moto2™ Edition
1
B00124_1
1.
Carrier plate
2.
Brake pad
2