Waveform:yreference - Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual

30
:WAVeform Commands

:WAVeform:YREFerence

Query Syntax
:WAVeform:YREFerence?
The :WAVeform:YREFerence? query returns the y- reference value for the
currently specified source. This value specifies the data point value where
the y- origin occurs. In this product, this is the data point value of the
center of the screen. It is undefined if the format is ASCii.
Return Format
<value><NL>
<value> ::= y-reference value in the current preamble in 32-bit
See Also
•
•
•
Example Code •
662
(see page 790)
NR1 format
"Introduction to :WAVeform Commands"
":WAVeform:PREamble"
":WAVeform:YORigin"
"Example Code" on page 645
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
on page 629
on page 644
on page 661