Lin Trigger - Agilent Technologies InfiniiVision 5000 Series User Manual

4
Triggering

LIN Trigger

128
LIN (Local Interconnect Network) trigger setup consists of connecting the oscilloscope to
a serial LIN signal.
LIN triggering will trigger on the rising edge at the Sync Break exit of the LIN single-wire
bus signal that marks the beginning of the message frame. If the N5424A CAN/LIN
Automotive Triggering and Decode option is installed on your oscilloscope, the Frame ID
and Frame ID and Data trigger types are also available.
A LIN signal message frame is shown below:
Sync Sync
Field
Break
Sync Break Exit
1 Press [Save/Recall]&Default Setup.
2 Turn on the analog or digital channel that you will be using for the LIN signal.
3 Press the [More] key in the Trigger section of the front panel, and rotate the Entry
knob until LIN is displayed in the Trigger softkey.
4 Press the Settings softkey to display the LIN Trigger Menu.
Trigger
Signals
menu condition
Identifier Data
Fields
Break

LIN trigger

Select
Frame ID
InfiniiVision Oscilloscopes User's Guide
Checksum
Field
Currently selected
Trigger level
signal source
or threshold
Return to
Enter data
values previous menu