M00 Program Stop - Mitsubishi Electric Q172CPU Programming Manual

7 MOTION PROGRAMS FOR POSITIONING CONTROL

7.15.1 M00 Program stop

Code
Function Program stop
M0
Format
[Explanation]
[Program Example]
M00
0 ;
Executing this command stops the program without execution of the next block.
By turning ON the re-start command (M4404+10n) after a stop, execution resumes
from the next block.
The program for which makes the program stop during positioning operation and
restarts positioning.
1) G01 X100. F10. ;
2) M00 ;
3) G01 X200. ;
V
X-axis 1) G01 X100.
Execution of program is stopped.
(Positioning)
(Program stop)
Re-start command (M4404+10n) ON
(Re-start command resumes positioning)
3) G01 X200.
2)
7 - 122
t
Re-start command (M4404+10n) ON
During stop as M00 is being executed