Program Stop (Reset: Server) - Mitsubishi Electric A1SJ71PB96F User Manual

7. COMMUNICATION THAT DO NOT REQUIRE
THE SEQUENCE PROGRAM
7.1.24
Use "Reset" service to STOP the sequence program from the client.
This can only be executed when the PC CPU status is Operational or Partially Operational. (Use
Status service to check the status.)
This can only be executed when the ProgramInvocation is in the STOPPED status. (Use GetOD to
check the status.)
PI status change
Status after execution
Use the GetOD service to check the PI status.
[Parameters required by the client]
• Access Specification
[Server (AJ71PB96F/A1SJ71PB96F) answer parameters]
None

Program stop (Reset: Server)

NON-EXISTENT
×
Specify the Index or Name of the Program Invocation to be stopped.
Access Specification
Index
PI Name
PI status before execution
IDLE
×
Setting value
PI Index
PI Name
7-29
MELSEC-A
RUNNING STOPPED
×
IDLE