Write Words Data To Intelligent Function Module/Special Function Module (To) - Mitsubishi Electric Q172CPU Programming Manual

7 MOTION PROGRAMS FOR POSITIONING CONTROL

7.16.31 Write words data to intelligent function module/special function module (TO)

Code
Write words data to
intelligent function
Function
module/special function
module
T O
Format
[Explanation]
Power supply
module
TO
D 1 D 2 S n ;
(1) A part for (n) words of data from device specified with (S) are written to since
address specified with (D2) of the buffer memory in the intelligent function
module/special function module controlled by the self CPU specified with (D1).
Device memory
(S)
(2) First I/O No. of the module set by system setting is specified by (D1).
Q02H Q173
CPU CPU(N)
(D1) sets 20H by the system setting when a TO instruction is executed in the D/A
conversion module (Q64DA).
(3) The devices that may be set at (D1), (D2), (S) and (n) are shown below.
Word devices
Setting
(16-bit integer type)
data
D
(D1)
(D2)
(S)
(n)
A part for (n) words of data from device specified with (S) are written to
since address specified with (D2) of the buffer memory in the intelligent
function module/special function module controlled by the self CPU
specified with (D1).
Number of words to be written. (1 to 256)
First device No. which writing data are stored.
First address of the buffer memory which writes
data.
First I/O No. of the intelligent function module/special
function module. (000H to FF0H)
(D1) Intelligent function
module/special
function module
buffer memory
(D2)
Write the data
of a part for
(n)words
QX40
First I/O
No. : 00H
(Note)
Bit devices
W #@ M
— —
— —
— —
— —
(Note) : The device No. cannot be specified indirectly.
7 - 180
Q64AD Q64DA
First I/O First I/O
No. : 10H No. : 20H
(Note)
B F X Y
— — —
— — —
— — —
— — —
Constant
(16-bit integer type)
—