Table 1.1 Multiple CPU errors which occurs in the Motion CPU (1000 to 10000) (Continued)
Middle
Error messages
classification
PARAMETER
Parameter
ERROR
Other issue
opportunity CPU
weight occasion error.
(MULTI CPU DOWN)
Multiple
CPU
Multiple CPU start
error
(MULTI EXE.
ERROR)
Multiple CPU start
error
(MULTI CPU
ERROR)
CPU error except for
CPU error
PLC CPU
except for
(CONT. UNIT
PLC CPU
ERROR)
(Note-4) (Note-5)
(Note-1) : CPU No. is stored in slot No. of the common information classification.
(Note-2) : Base No. in "common information classification code" of "error information classification code" is 0 : CPU base, 1 to 7 : Number of extension bases.
(Note-3) : Because a stop error or CPU No. except CPU No. that it was reset becomes MULTI CPU DOWN simultaneously, a stop error or CPU No. except
CPU No. that it was reset may store in the classification of error information depending on timing.
(Note-4) : When an error occurs in the Motion CPU and so on except PLC CPU, if a PC diagnosis is made in the CPU except PLC CPU from GX Developer via
PLC CPU, the error code "10000" is indicated.
(Note-5) : A self-diagnosis error flag (M9008) and a diagnosis error flag (M9010) do not turn on at the error detection.
(Note-6) : MOTION RUN LED turns off at the stop error occurrence. (The condition of RUN LED does not change.).